How-to Section

**Hoosier** · 11-28-2006, 07:28 AM

Just as the title suggests, this is the section for solid Moto tips. Try and avoid posting simple, single line/image, basic tips. Like, "I put aluminum foil around my headers when changing my oil so when I remove the filter it don't drain onto them

". While that may be a good tip, that alone isn't worthy of an entire thread. Also, this is the only area on the site that will require staff approval before a new thread is posted. We don't want folks posting some hair brained how-to on doing stand up wheelies that involves a method that's a sure fire means of getting a fun ambulance ride with the flashy lights a-goin'! If you have some good info that's sure to help another rider, be it noob's or veterans, by all means. . .POST UP! Pics are a big help and a bonus, but are not required.

As usual, if you have any questions, post up in this thread

**97nismo** · 11-28-2006, 12:30 PM

Haven't heard of the aluminum foil trick before. I usually just lay some paper towels on the header. Kick I didn't know your bike had a V shaped motor in it.

**Rex** · 11-28-2006, 03:26 PM

Originally Posted by 97nismo

Haven't heard of the aluminum foil trick before. I usually just lay some paper towels on the header. Kick I didn't know your bike had a V shaped motor in it.

Oil soaks through paper towels, foil is fool proof

. Luckily SV's don't have to bother with it, The oil has a clear view of the floor.

I have a full write up with picts on my shifter (The quick fix to get ya back on the road). Think it's worth a thread?

**Hoosier** · 11-28-2006, 07:13 PM

Originally Posted by 97nismo

. . .Kick I didn't know your bike had a V shaped motor in it.

It don't, but when you pull the filter, it's BAM! Direct stream right onto those precious Ti pipes. . .OH NOES!!!

**97nismo** · 11-28-2006, 09:48 PM

Originally Posted by Kickaho

It don't, but when you pull the filter, it's BAM! Direct stream right onto those precious Ti pipes. . .OH NOES!!!

I said that becaue you said headers as in plural. I was just giving you a hard time because I see it all the time on car forums.

**Hoosier** · 11-29-2006, 07:27 AM

Ahh, gottcha recon I should'a said "header pipes" then

**ilKhan** · 08-30-2008, 04:47 PM

oops. i posted a question thread in here. I've already found another thread with my answer so if a mod sees it, just deleted, deny whatever.

**zxjohnson** · 09-03-2008, 09:52 PM

well i went down and i am wondering if anyone knows the part # for the front fairing for a 2006 zx 10 r ( green ) i have found the microphish just un sure what part i should order / guess i will have to go and order it through s&s or something but you can get o.e.m parts from bike bandit and few other its probably cheaper that way. So if anyone knows the correct # please let me know thanks